PLS fully Automatic Autoclaves are most useful to sterilize Lab glassware, plastic tubing, liquid in sealed glass containers, product contact and small critical equipment used in the aseptic formulation and parenteral drugs.
Double body construction, single Chamber for Steam and Water, covered externally by outer shell.
Lid made of thick stainless steel fitted with Pressure Gauge, Safety Valves (2 Nos.) , Vacuum Valve, Steam Release Valve and 3/8” BSP Port fitted with coupling for Validation.
Pressure tested up to 22 PSI factory set at 15 PSI.
Complete unit with Automatic air purging, Digital Temperature Indicating Controller set at 121.1°c (15 PSI) with 0.1°c Accuracy/ Resolution, with BUILTIN electronic Digital timer range 0 to 99 min.
Autoclaving time cycle starts automatically when set pressure is achieved.
Fitted with Solenoid Valve for Purging and automatic release of Steam once autoclaving cycle gets completed.
Incorporated with an Automatic Pressure Control Switch as an additional safety device.
Low Water level cut-off : Low water level cut-off assembly connected to heater which automatically cuts off power to heater if water level is not sufficient thus eliminating heater burn outs.
Foot lifting arrangement included for all sizes.·
Electrically operated on 230 V AC, 50 Hz. Single Phase supply.